Horizontal Band Saw

1. Saw wheel: high hardness of national standard steel, through ten processes precision processing into 700mm diameter 60 thick saw wheel, bigger than the traditional band saw wheel, saw surface contact surface, with better stability, wear resistance characteristics, the unique outer circle design makes the saw blade not easy to run saw, saw cutting precision, reduce scrap rate.

2. Heavy-duty bearing device: SKF heavy-duty separation bearing is used inside the saw wheel, which can withstand large tensile force, so that the deformation of the two saw wheels is small when tensioning, reducing the wear rate of the outer circle of the saw wheel, prolonging the service life of the saw wheel and reducing the probability of the blade fracture.

3. Saw wheel tensioning guide: Taiwan silver guide slider guide, tensioning saw wheel slider gap is small, saw wheel is not easy to swing, saw blade stability is good.

4. Equipped with broken bar protection: no matter how good things have a service life, once the saw blade broken, automatic stop, prevent the saw blade from flying out, more safe

5. Chain control. It is necessary to start the saw wheel before starting the conveyor belt to feed, so as to avoid the damage of the machine caused by the negligence of workers who have fed the material without opening the saw.

6. The feeding speed is automatically controlled by frequency converter and driven by motor. The speed is 0-10m/min.

7. Water spray device: the saw blade generates large heat when it is sawed. The water spray device atomizes the water and sprays it on the saw blade to cool down and lubricate it.